JVC LET0239-001A - Manual (Page 90)

90
DO YOU WANT TO DELETE
SELECTED INDEX PICTURE? Appears when you have tried to delete a programme
from the HDD. Make sure you really want to delete the
programme. (See page 36.)
GUIDE PROGRAM IS NOT SET
SET GUIDE PROGRAM THEN RETRY To use the VIDEO P LUS + ® system for timer recording, set
Guide Program number in advance. (See page 69.)
PROGRAMME COMPLETED
CHECK PROGRAMME LIST TO CONFIRM Timer programming is completed properly.
NO PROGRAMME TO PLAYBACK There is no recorded programme in the HDD.
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY An invalid P LUS C ODE number is entered.
PLEASE ADJUST CLOCK BEFORE TIMER
PROGRAMMING To set the timer programming, set the built-in clock in
advance. (See page 69.)
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMME You can store 16 timer programmings. To store a new
programming, erase an unnecessary programming. (See
page 45.)
PROGRAMME NOT COMPLETED
PROGRAMME OVERLAPPED
PLEASE CONFIRM AND MODIFY The timer programming you set is overlapping with
another timer programming.
PROGRAMMING NOT COMPLETED
EXIT? Appears when you stop setting timer programming.
REMAINING CAPACITY IS SMALL
DELETE UNWANTED PROGRAMME FROM HDD The remaining capacity of the HDD is short for the
current recording.
TITLE MEMORY IS FULL, UNABLE TO RECORD
DELETE UNWANTED PROGRAMME FROM HDD You have already stored 100 programmes in the HDD.
The recording cannot be started even though the capacity
for the recording is enough.
UNABLE TO GO BACK ANYMORE You cannot go back beyond the start point of the
recording.
UNABLE TO GO FORWARD ANYMORE You cannot go forward beyond the end point of the
recording.
UNABLE TO SET TIMER PROGRAMME
DUE TO SHORTAGE OF CAPACITY
DELETE UNWANTED PROGRAMME FROM HDD There is not enough memory in the HDD for recording.
To increase the free space, delete the unwanted
programmes. (See page 36.)
MESSAGE DESCRIPTION
ADDITIONAL INFORMATION (cont.)