JVC LET0239-001A - Manual (Page 53)

53
Changing the playback
order
Playing in a specific order—Program
Play
By programming tracks, you can play up to 99 tracks in
any order. You may program the same track more than
once.
1 Before starting playback, press ON SCREEN twice.
The menu bar appears on the TV screen.
2 Press 3 or 2 to move to , then press ENTER.
3 Press ENTER.
• The PROGRAM table appears.
• The PROGRAM indicator lights in the display
window.
4 Press the number buttons to specify tracks in the
desired order.
• Examples:To select 5: press 5 .
To select 10: press 1 , then 0 .
To select 23: press 2 , then 3 .
To correct the program
Press 5 or ∞ to move to the track to be corrected,
then press CANCEL . The track is erased and the
subsequent programmed tracks move up in the
PROGRAM table.
Pressing
7 ( CLEAR ) clears all the programmed tracks.
5 Press 3 (SELECT) to start Program Play.
• With an Audio CD, the PROGRAM table remains
on the TV during Program Play. (Pressing ON
SCREEN clears the PROGRAM table, and brings up
the status bar.)
• When all of the programmed tracks have finished
playing, the unit stops and the PROGRAM table
appears again. (Notice that the program is not
erased).
To stop Program Play and to check the program
contents
Press 7 ( CLEAR ).
Playback stops and the PROGRAM table is shown.
• If the PROGRAM table is not shown, you can bring up
the table by performing steps 1 to 3.
To clear the program
While stopped and the PROGRAM table is shown, press
7 ( CLEAR ).
To exit from the program mode
After clearing the program, press ON SCREEN .
NOTES
•When the disc is ejected or the unit is turned off, the program
is also cleared.
•During Program Play, you cannot edit the program contents.
ENTER
CLEAR
CANCEL
ON SCREEN
SELECT
PROG.
OFF PROG. RND.
TIME 0:00 TRACK 1
PROGRAM Total Program Time 00:25:12
No. Track Disc
1 2 1
2 3 5
3 7 4
4 4 2
5 3 3
6 5 4
7 6 6
8
9
10
USE NUMERIC KEYS TO PROGRAM TRACKS.
CANCEL DELETES THE LAST STEP.
7
DELETES ALL.
The total program time
Selected track number