Showing private entries, Locking your spt 1500 terminal – Symbol Technologies SPT 1500 User Manual
Page 191
12-3
Applications: Security
Showing Private Entries
After you hide Private entries, you can use the Security application to display them again.
To show Private entries:
1. Tap the Show box in the Security screen.
If you did not assign a password, your Private entries should be visible. If you did
assign a password, the Show Private Records dialog appears.
2. Enter your password.
3. Tap the Show box to close the Show Private Records dialog and display Private
entries in your SPT 1500 terminal applications.
Locking Your SPT 1500 Terminal
You can also lock your SPT 1500 terminal, so that you need to enter your password to
operate it.
Important: If you lock your SPT 1500 terminal as described in the following procedure, you
need to enter the exact password to re-activate your SPT 1500 terminal. If you
forget the password, you need to use the reset button to resume using your SPT
1500 terminal. Using the reset button deletes all the entries in your SPT 1500
terminal; however, you can restore all synchronized data at the next HotSync
®
To lock your SPT 1500 terminal with a password:
Tap here