Symbol Technologies SPT 1500 - Manual (Page 24)

1-6
SPT 1500 Product Reference Guide
Calibrating the Screen
The first time you start your SPT 1500 terminal the calibration screen automatically appears.
Follow the steps in this section to align the internal circuitry of your SPT 1500 terminal with
its touch-sensitive screen.
To calibrate your SPT 1500:
1. Press the green power button on the front panel of your SPT 1500 terminal to display
the calibration screen.
Note: If necessary, adjust the contrast control located on the side of the SPT 1500
terminal, so the alignment screen is clear and readable.
2. Remove the stylus from its storage slot on the back of the SPT 1500 terminal.
3. Tap the exact center of each target that appears on the screen with the tip of the
stylus.
Power
button