Symbol Technologies SPT 1500 - Manual (Page 205)

14-3
Applications: Laser Scanner and Laser Pointer
t Level: only the SPT 1500 scan trigger initiates the scan; the laser is turned off when
the trigger is released or the decode was successful.
t Pulse: only the SPT 1500 scan trigger initiates the scan; the laser is turned off when
laser_on_time is reached or when the decode was successful.
t Host: (default): The SPT 1500 scan trigger or the application’s ScanCmdStartDecode
command initiates the scan; the laser is turned off when the trigger is released, or
when laser_on_time is reached, the ScanCmdStopDecode command is called, or the
decode was successful.
Bar Type
Once a bar code is decoded, this field displays the type of the decoded bar codes (i.e., Code
39, Code 128, Code 93, etc.).
Bar Data
Once a bar code is decoded, displays the decoded data.
Demo Scan Menu Options
To customize some of these features, select your Menu icon to display the menu bar available
for this application. The following are the menu options:
Setup
This menu option allows you to customize the Hardware and Code Format setup.
Hardware Setup:
t Beep on Good Decode: determines whether or not the terminal beeps to indicate a
successful decode.
t Redundancy: determines whether or not the scanner uses redundancy.
t Decode LED On Time: defines the length of time the decode LED remains on when
a symbol is decoded.
t Laser On Time: defines the length of time the laser beam remains on when the trigger
is pressed.
t Aim Duration: defines the length of time the laser pointer beam remains on when the
trigger is pressed or the scan button is tapped.
t Linear Security: defines the linear security level to be used by the scanner; level 1, 2,
3, or 4.