Two-dimensional bar codes maxicode – SATO CT410 User Manual
Page 121
Two-Dimensional Bar Codes
Maxicode
Command Structure
<ESC>BVa,b,c,ddddddddd,eee,fff,gggg.....<ESC>
a
=
Position of Maxicode symbol within the set, when used
in a structured append format 1~8.
b
=
Total number of Maxicode symbols in the set, when used
in a structured format 1~8.
c
=
2
For Mode 2 Structured Carrier Message
for Domestic U.S. UPS shipments
3
For Mode 3 Structured Carrier Message
for International UPS shipments
4
Standard symbol
5
Not currently supported
6
Reader programming
ddd..ddd
9 digit numeric Postal Code
eee =
3 digit numeric Country Code
fff
=
3 digit numeric Service Class
gg..g =
Data, terminated by <ESC>
Example:
<ESC>BV1,2,3,123456789,222,333,MESSAGE<ESC>
Placement:
Immediately preceding data to be encoded
Default:
None
Command Function
To print a Maxicode two-dimensional bar code image on a label. See
Appendix B for specific information on using each individual bar code
symbol.
Command Function
To print a UPS Maxicode symbol.
<ESC>A<ESC>V0100<ESC>H0100
<ESC>BV1,1,2,123456789,840,001,[)<RS>01<GS>961Z01547089<GS>UPSN
<GS>056872<GS>349<GS>99999999<GS>001/005<GS>029<GS>N<GS>
<GS>LENEXA<GS>KS<RS><EOT>
<ESC>Q001<ESC>Z
Section 4. Programming Reference
SATO CT Series Printers
9001069
A
Page 4-77