SATO CT410 - Manual (Page 165)

$a,b,c,d Vector font. Specifies printing of the unique SATO vector font.
a = A Helvetica Bold (proportional spacing)
B Helvetica Bold (fixed spacing)
b = Font width (50-999 dots*)
c = Font height (50-999 dots*)
d = Font variation (0-9) as follows:
0
Standard
1 Standard open (outlined)
2 Gray (mesh) pattern 1
3 Gray (mesh) pattern 2
4 Gray (mesh) pattern 3
5 Standard, shadow 1
6 Standard, shadow 2
7 Standard mirror image
8 Italic
9 Italic open (outlined)
Page 4-38
$=(data) Data for Vector font . Page 4-38
#Eab Print Darkness. Specifies a new print darkness setting.
a = Print Darkness Range (A to F)
b = Print Darkness Level (1 to 5)
Page 4-57
(aaaa,bbbb Reverse Image. Reverse image from black to white and vice versa.
Units of measure are dots. Page 4-65
CT400 CT410
aaaa = Horizontal Length 0001-0832 0001-1248
bbbb = Vertical Length 0001-3200 0001-4800
& Store Form Overlay. Stores a specified label image in the printer’s
volatile form overlay memory. Page 4-43
/ Recall Form Overlay. Recalls the label image from the printer’s form
overlay memory for printing. Page 4-42
0 (zero) Replace Data (Partial Edit). Provides the ability to replace a specified
area of the previous label with new data. Page 4-63
*a Clear Print Job(s) and Memory. Clears individual memory and
buffers.
a = When not included in command, clears print jobs in
Multi-Buffer mode.
a = If included in command, specifies memory section to be cleared
T
Custom character memory, printer
& Form overlay memory, printer
X Clears all memory all memory and buffers
Page 4-27
@ Off-Line. Signals the printer to go off-line after the completion of a print
job. Page 4-55
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Quick Reference
Page A-10 9001069 A SATO CT Series Printers