Job name – SATO CT410 User Manual
Page 94
Job Name
Command Structure
<ESC>WKnnn. . . n
nn..n =
Job Name assigned, up to 16 ASCII characters
Example:
<ESC>WKSATO
Placement:
Immediately following the <ESC>A in the job data stream.
Default:
None
Command Function
This command is to identify a particular job using a descriptive name
Printer Input
<ESC>A
<ESC>WKSATO
. . . Job . . .
<ESC>Z
Printer Output
There is no printer output as a result of this command. The
information is returned to the host upon receipt of a Bi-Com status
request.
Special Notes
1. Works only in Bi-Com mode. The Job Name must be stored before
Bi-Com status mode can be used.
2. If more than one Job Name is sent in a single job, i.e.
<ESC>A
<ESC>WKSATO
. . . . . . . . . .
<ESC>WKSATO AMERICA
. . . . . . . . .
the last name transmitted will be used.
Section 4. Programming Reference
Page 4-50
9001069
A
SATO CT Series Printers