SATO CT410 - Manual (Page 127)

Printer Setting
Command Structure <ESC>PGabcdefghhijklmnopqrstuvwxyz
COMMAND
PARAMETER
HEX
VALUE
DESCRIPTION
a 00 Reserved
b 00 Reserved
c 00 Print Speed, 2 ips (50 mm/s)
01 Print Speed, 3 ips (75 mm/s)
02 Print Speed, 4 ips (100 mm/s)
03 Print Speed, 5 ips (125 mm/s)
04 Print Speed, 6 ips (150 mm/s)
d 00 Reserved
e 00 Cutter Mode, Backfeed after print
01 Cutter Mode, Backfeed before print
02 Cutter Mode, no Backfeed
f 00 Dispense Mode, Backfeed after print
01 Dispense Mode, Backfeed before print
g 00 Reserved
h 41 Print Darkness Range A
42 Print Darkness Range B
43 Print Darkness Range C
44 Print Darkness Range D
45 Print Darkness Range E
46 Print Darkness Range F
h 01 Print Darkness Level 1
02 Print Darkness Level 2
03 Print Darkness Level 3
04 Print Darkness Level 4
05 Print Darkness Level 5
i 00 Reflective (Eye-Mark) Sensor
01 Transmissive (Gap) Sensor
02 Sensors Disabled
Section 4. Programming Reference
SATO CT Series Printers 9001069 A Page 4-83