Cut last – SATO CT410 User Manual
Page 77
Cut Last
Command Structure
<ESC>YC
Example:
<ESC>YC
Placement:
Separate data stream sent to the printer
Default:
None
Command Function
To control the cutting of labels when using a SATO cutter unit with
the printer. This command allows the cutting of a printed multi-part
tag or label that is left in the printer after a job is cut using the
<ESC>CT Cut command.
Input to Printer:
<ESC>A
<ESC>YC
<ESC>Z
Printer Output:
This command will cut the feed the last printed label to the cut
position, cut the label and then backfeed to the head position in
preparation for printing the next job.
Notes
1. You must have the optional printer Cutter to use this function.
Contact your SATO representative for more information.
A
B
C
Cut position Head position
A
B
C
D
B
C
D
B
C
D
Label A printed
Labels B, C, D
unprinted.
Feed A to cut
position
Cut A
Backfeed to
place B at print
position
Section 4. Programming Reference
SATO CT Series Printers
9001069
A
Page 4-33