Smooth Fitness SMOOTH CE-3.0DS - Manual (Page 4)

3
“
H
ARDWARE
I
DENTIFICATION
C
HART
”
Unpack the box in a clear area. Use the List of Hardware below to check the contents of the hardware kit. This chart is
provided to help identify the hardware used in the assembly process. Place the washers, the end of bolts, or screws on
the circles to check for the correct diameter. Use the ruler to check the length of the bolts and screws.
NOTICE: The length of all bolts and screws, except those with flat heads, are
measured from below the head to the end of the bolt or screw. Flat head
bolts and screws are measured from the top of the head to the end of the
bolt or screw
Part No. and Description Q’TY
86 Bolt, Round Head (M5x12mm) 2
90 Bolt, Socket Head (M6x35mm) 4
92 Bolt, Socket Head (M8x25mm) 4
94 Bolt, Socket Head (M8x90mm) 2
113 Bolt, Socket Head (M8x50mm) 2
97 Bolt, Round Head (M8x16mm) 4
100 Bolt, Button Head (M8x90mm) 2
101 Bolt, Button Head (M10x85mm) 2
114 Bolt, Button Head (M6x12mm) 2
115 Bolt, Button Head (M8x20mm) 4
102 Nylock Nut (M6) 4
105 Nylock Nut (M8) 4
106 Nylock Nut (M10) 2
104 Carriage Bolt (M8x85mm) 2
110 Washer (M10) 2
108 Lock Washer (M8) 12
117 Lock Washer (M6) 2