Smooth Fitness SMOOTH CE-3.0DS - Manual (Page 5)

4
“
A
SSEMBLY
I
NSTRUCTIONS
”
S
TEP 1
–
Stabilizer Assembly
a. Attach the REAR STABILIZER(2), the one with LEVELING CAP 76mm(76), onto the MAIN FRAME(1)
with 2 x CARRIAGE BOLTS(M8x85mm)(104) and Nylon lock Nut (M8)(105).
b. Attach the FRONT STABILIZER(3) onto the MAIN FRAME(1) with SOCKET HEAD BOLTS
(M8x90mm)(94) and LOCK WASHERS(M8)(108).
NOTE: You can adjust the LEVELING CAPS 76mm(76) on the REAR STABILIZER(2) to level the
machine.
S
TEP 2
–
Upright Post Assembly
a. Connect the UPPER CONNECTION WIRE(37) and MIDDLE CONNECTION WIRE(38).
NOTE: After connecting the wires, verify the connection is properly made. Caution: Incorrect
connection may cause the computer to malfunction. Check that all pins in connector are not
bent.
b. Gently insert the UPRIGHT POST(4) into the MAIN FRAME(1) and secure with 2 x SOCKET HEAD
BOLTS(M8x25mm)(92), 2 x LOCK WASHERS(M8)(108) and 2 x SOCKET HEAD
BOLTS(M8x50mm)(113), 2 x LOCK WASHERS(M8)(108).
CAUTION Pinch Point: Be careful not to damage the wires when attaching the Upright post