Smooth Fitness SMOOTH CE-3.0DS - Manual (Page 9)

8
“
S
ET
U
P &
O
PERATIONAL
I
NSTRUCTIONS
”
LEVELING: Adjust the LEVELING CAPS(76) on the REAR STABILIZER(2) so that the item sets on the floor
without rocking. Reposition the LEVELING CAPS(76) on the REAR STABILIZER(2) in order to level the item.
MOVING:
a. Before moving the CE-3.0DS, Make sure the unit is in Elliptical Mode Pictured below.
b. The unit has a pair of MOVING WHEELS(75) built into the FRONT STABILIZER(3). It
’s recommended to
hold the REAR STABILIZER(2) with two hands and carefully pull the item to the desired location.
ELLIPTICAL MODE AND STEPPER MODE
Your CE-3.0DS can be used in the ELLIPTICAL mode or the
STEPPER mode. Refer to the illustration on the right to setup the
ELLIPTICAL mode or the STEPPER mode.
STEPPER MODE:
Attach the LINKAGE CONNECTORS(43) to the
FRONT STABILIZER(3).
※ It is recommended to hold the stationary handle bar when in
stepper mode.
※
NOTE: STEPPER mode, works best with the crank
rotating backward.
ELLIPTICAL MODE: Insert the LINKAGE CONNECTOR(43) through the CONNECTOR(45) and secure
with the LOCKING KNOB(44). CAUTION: Securely tighten both LOCKING
KNOBS(44) before exercising.