Smooth Fitness SMOOTH CE-3.0DS - Manual (Page 7)

6
“
A
SSEMBLY
I
NSTRUCTIONS
”
S TEP 5 – Wire & Stationary Handlebar Assembly
a. Connect the MIDDLE PULSE SENSOR WIRE(41A) and the LOWER PULSE SENSOR WIRE (42A).
b. Connect the MIDDLE PULSE SENSOR WIRE(41B) and the LOWER PULSE SENSOR WIRE (42B).
NOTE: Be careful not to pinch the wires
c. Insert the STATIONARY HANDLE BAR(7,8) into the top tube on the UPRIGHT POST(4) with 2 x
BUTTON HEAD BOLTS(M6x12mm)(114) and 2 x LOCK WASHERS(M6)(117). NOTE Do not tighten
114 until the end of step 5.
d. Attach the bottom of STATIONARY HANDLEBAR(7,8) onto the FRONT STABILIZER(3) with 4 x
BUTTON HEAD BOLTS(M8x20mm)(115) and 4 x LOCK WASHERS(M8)(108).
e. Fully tighten (114) and (115) bolts now.NOTE: Make sure the bolts are fully tightened before moving to
the next step.
S
TEP 6
–
Wire & Console Assembly
a. Plug the MIDDLE CONNECTION WIRE(38) into the UPPER CONNECTION WIRE(37). Connect the
MIDDLE PULSE SENSOR WIRE(41) and the UPPER PULSE SENSOR WIRE(40).
NOTE: Be careful not
to pinch the wires
b. Attach the CONSOLE(46) onto the UPRIGHT POST(4) with 2 x SOCKET HEAD BOLTS(M8x25mm)(92)
and 2 x LOCK WASHERS(M8)(108).