Sharp AR-C160 - Manual (Page 117)

6-9
CHAPTER
6
SPECIFICATIONS
GENERAL INFORMATION Specifications
DUPLEX MODULE (optional)
Paper type Ordinary paper only
Number of copies 1 (trayless system)
Copy paper size 5-1/2" x 8-1/2", 7-1/4" x 10-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 13", 8-1/2" x 14", 11" x 17"
Copy paper weight 15 lbs. to 28 lbs.
REVERSING AUTOMATIC DOCUMENT FEEDER (optional)
Acceptable originals Single-sided originals: 14 to 34 lbs.
Weight: Two-sided originals: 14 to 34 lbs. for 5-1/2" x 8-1/2"and
8-1/2" x 11" originals.
14 to 29 lbs. for 8-1/2"x 14" and 11" x 17" originals.
Size: 5-1/2" x 8-1/2" to 11" x 17"
Capacity: Up to 50 sheets for 5-1/2" x 8-1/2" and 8-1/2" x 11" originals provided
the total aggregate thickness does not exceed 1/4" or 6.5 mm (14 to
20 lbs.) or 3/16" or 5 mm (21 to 34 lbs.) Up to 30 sheets for 8-1/2" x
14" and 11" x 17" originals.
Copier dimensions 29-17/32" (W) x 27-3/8" (D) x 41-47/64" (H)
(with optional document (750 mm (W) x 695 mm (D) x 1060 mm (H))
cover)
Opperating conditions* Temperature: 59°F to 95°F (15°C to 35°C)
Humidity:
20% to 80%
* If the temperature is higher than 86°F (30°C), the humidity should be
lower than 60%.
Optional equipment Document cover (AR-VR2)
Reversing automatic document feeder (AR-RF1)
20-bin staple sorter (AR-SS2)
Finisher (AR-FN4)
Large capacity tray (AR-LC2N)
500-sheet paper drawer (AR-CS2N)
Duplex module (AR-DU2N)
Fiery print controller (AR-PE2)
Print engine power supply unit (AR-PX4)