Sharp AR-C160 - Manual (Page 96)

5-2
CHAPTER
5
( P. 5-2)
( P. 5-3)
( P. 5-5)
( P. 5-6)
( P. 5-9)
Misfeed in the optional RADF
When the optional RADF misfeeds an original sheet, the copier will
stop and the misfeed message will appear.
An original misfeed may occur at one of three locations:
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
A B C
MISFEED REMOVAL
When a misfeed occurs, the copier will stop.
The message “
MISFEED HAS OCCURRED. CLEAR
INDICATED AREA. PRESS FOR RECOVERY
INSTRUCTIONS. ” will appear with a display of paper
misfeed locations. Press the INFORMATION key for
more detailed information as necessary.
If paper becomes accidentally torn during removal, be
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
First confirm the misfeed locations.
For misfeeds in an optional staple sorter, see page 7-13.
For misfeeds in an optional large capacity tray, see page
7-17.
For misfeeds in an optional finisher, see page 7-26.
COPIER TROUBLE?
Misfeed removal
MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.