Sharp AR-C160 - Manual (Page 141)

7-23
CHAPTER
7
OPTIONAL EQUIPMENT
Finisher (AR-FN4)
FINISHER (AR-FN4)
5 Remove the rear paper and tape from the cartridge.
● Pull them straight. If they are pulled obliquely, the tape may be
torn.
6 Insert the staple box into the stapler until it clicks in
place.
7 Push the finisher toward the copier and latch it in place.
● If the stapler does not work properly after cartridge installation,
it may have a jammed staple in it. See next page.
● Staples for the finisher are available from your Sharp dealer.
CAUTION
Use caution while latching the finisher into place.
To prevent pinching your fingers, do not place your hand or fingers
on the release lever while moving the finisher toward the copier.