Special papers (manual feed) – Sharp AR-C160 User Manual

Page 38

Advertising
background image

2-14

CHAPTER

2

1

Place the original on the document glass or in the
optional document feeder tray.

2

Open the bypass tray.

3

Set the bypass tray guides to the width of the copy
paper.

Be sure to extend the tray when feeding paper larger than
8-1/2" x 11" size.

If the bypass tray guides are set wider than the copy paper, the
inside of the machine may become soiled, resulting in smudges
on succeeding copies.

4

Insert the copy paper all the way into the bypass tray.

Special purpose papers other than SHARP recommended
transparency film must be fed individually. Multiple sheets of
SHARP recommended transparency film can be loaded in the
bypass tray.

Up to 50 sheets of standard copy paper measuring from
5-1/2" x 8-1/2" to 12" x 18" can be loaded into the bypass tray.

When adding paper, first remove remaining paper, combine it
with the paper to be added and then reload as a single stack.

5

Press the “PAPER SELECT” key on the touch panel and
then select the desired paper type in the bypass tray
section.

“16 ~ 28 lbs.” (“PLAIN PAPER”), “28+ ~ 35 lbs.” (“HEAVY
PAPER 1”), “35+ ~ 75 lbs.” (“HEAVY PAPER 2”) or
“TRANSPARENCY” can be set.

6

Set the number of copies.

7

Press the COLOR COPY START (

) key or BLACK

COPY START (

) key.

MAKING COPIES

Special papers (manual feed)

SPECIAL PAPERS (manual feed)

The bypass tray is used to copy onto transparency film and other
special purpose papers. Up to 50 sheets of standard copy paper can
be set in the bypass tray.

When copying onto transparency film, the maximum image loss on
the copies will be 13/32" (10 mm) along the leading and trailing
edges and 1/4" (6 mm) in total along the other edges.
Transparency film must be fed long edge into the feed slot.

Automatic duplex copying will not work when a non-standard sized
paper is used even if an optional duplex module (AR-DU2N) is
installed. If a duplex copying mode is selected and a non-standard
sized paper is used from the bypass tray, the corresponding one-
sided mode will be selected automatically when a START key is
pressed.

C

CA

CLEAR

INTERRUPT

CLEAR

ALL

ER SELECT

100%

COPY RATIO

.8/ 11

11 17

8/ 14

8/ 11

1

2

1

2

1

2

16~28 lbs.

28+~35 lbs.

35+~55 lbs.

TRANSPARENCY

INFORMATION

CUSTOM

SETTINGS

PAPER TYPE

Advertising