Sharp AR-C160 - Manual (Page 15)

1-3
CHAPTER
1
CAUTIONS
1. Do not touch the photoconductive drums or paper transport.
Scratches or smudges on them will cause copy defects.
2. The fusing unit is extremely hot. Exercise care in this area.
3. Do not look directly at the light source. Doing so may damage
your eyes.
4. Installation adjusters.
When moving the machine, be sure to raise the installation
adjusters. After moving the machine, lower the installation
adjusters until they reach the floor.
This copier contains fusing oil that is very slippery if leaked
on the floor. Ensure that the machine is located at level
position and take care if it is to be moved that oil leakage does
not occur.
5. This copier is equipped with a forgery prevention feature. If paper
that closely resembles paper money is used as an original,
copying may not be performed properly.
GETTING STARTED
Cautions
Fusing unit
Paper transport
Lock
Release
Adjuster
“BATTERY DISPOSAL”
THIS MACHINE CONTAINS A MANGANESE DIOXIDE BATTERY WHICH MUST BE DISPOSED
OF PROPERLY. CONTACT YOUR SHARP DEALER OR SERVICER FOR INSTRUCTIONS.
This product utilizes tin-lead solder, and a fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or the Electronics Industries
Alliance: www.eia.org