Sharp AR-C160 - Manual (Page 50)

3-6
CHAPTER
3
Erase function can be used to eliminate shadow lines around the edges and
the center part of copies as shown in the illustrations, which are caused
when such originals as thick paper, books or bound documents are used.
3 patterns of erase function, EDGE ERASE, CENTER ERASE and
EDGE+CENTER ERASE can be selected.
● The standard erase width is 1/2", but can be changed from 0" to 1" in
1/8" increments.
★ KEY OPERATOR The initial setting of the width for edge erase and center
erase can be changed. See page 20 of the KEY OPERATOR’S GUIDE.
SPECIAL FUNCTIONS
Erase
ERASE
1 Place an original on the document glass or in the
optional document feeder tray.
2 Press the SPECIAL MODES key.
● The SPECIAL MODES screen will appear.
3 Press the “ERASE” key on the touch panel.
● The setting screen for ERASE will appear.
2-SIDED
COPY
SPECIAL
MODES
READY TO
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT ERASE
IMAGE EDIT COVERS
CENTERING
DUAL PAGE
COPY
COLOR
ADJUSTMENTS
TRANSPARENCY INSERTS
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
8/ 11 AUTO 1
2
READY TO COPY.
ERASE
EDGE ERASE
CENTER ERASE
EDGE+CENTER
ERASE
CANCEL
1/2
OK
OK
(0~1)
inch
A B A B
A A
A B A B
Edge erase
Edge + center erase
Center erase
(Original) (Copy)