Sharp AR-C160 - Manual (Page 23)

1-11
CHAPTER
1
COPY MODE AND PRINT MODE
Using the operation panel in the print mode
The operation panel provides access to many of the printer’s features
and functions. The basic procedure to access the printer’s features
and functions is shown below.
1 If the printer is in the copy mode, press the PRINT key to
select the print mode.
● The basic screen of the print mode will appear.
2 Press the “ONLINE/OFFLINE” key on the touch panel to
switch the printer to the off-line mode.
3 Press the “fiery” key on the touch panel.
4 Use the keys on the touch panel to select the desired
operation.
● For details of the functions in the print mode, see the printer
operation manual.
● To return to the printer basic screen, press the return ( )
key.
How to select the paper type for the bypass tray
Before the paper type can be selected, paper must be placed in the
bypass tray and the key operator program “Enable Bypass-Tray
Type Detection” must be used to enable the selection (see page 33 of
the KEY OPERATOR’S GUIDE). Proceed as follows.
1 Press the PRINT key to select the print mode.
2 Press the “ONLINE/OFFLINE” key to enter the off-line
mode.
3 Press the “PAPER” key.
4 Use the touch panel to enter the paper type to match the
paper set in the bypass tray.
5 Press the “ONLINE/OFFLINE” key to restore the on-line
mode.
GETTING STARTED
Copy mode and print mode
1. 8 1 2
2. 17 11
11
3. 8 14 1
2
READY TO PRINT.
ONLINE
OFFLINE
PAPER SELECT
DUPLEX
100%
FIERY PRINTER SCREEN
AR-C160 PRINTER
idle
5348MB V1.0
info