Sharp AR-C160 - Manual (Page 41)

2-17
CHAPTER
2
MAKING COPIES
Exposure adjustments
1 Press the “EXPOSURE” key on the touch panel.
2 Select “TEXT/PRTD. PHOTO”, “TEXT”, “TEXT/PHOTO”,
“PRINTED PHOTO”, “PHOTO”, or “MAP” depending
upon the original type.
● When making a copy from a copy made by the AR-C160,
checking the box of COPY OF COPY then choosing the proper
alternatives depending upon the content of the original allows for
the best result.
● When checking the COPY OF COPY check box, TEXT/
PRTD.PHOTO, TEXT and PRINTED PHOTO can be selected.
● If COLOR TONE ENHANCEMENT is checked, color copies will
be more vivid. COLOR TONE ENHANCEMENT and COPY OF
COPY cannot be selected at the same time. The COLOR TONE
ENHANCEMENT mode cannot be selected with the single color
function. This mode, however, can be used with the RGB adjust
function.
3 If “TEXT/PRTD. PHOTO”, “TEXT” or “TEXT/PHOTO”
has been selected in step 2, select “AUTO” or “MANUAL”.
● When the COPY OF COPY check box is checked, the exposure
is automatically set to “MANUAL”.
4 If the manual mode has been selected, use the and
keys to adjust the copy density as desired.
EXPOSURE ADJUSTMENTS
UTPUT
AUTO
EXPOSURE PAPE
AUTO
TEXT/
PRTD.PHOTO
TEXT
PRINTED
PHOTO
COPY
OF COPY
TEXT/PHOTO
PHOTO
MAP
EXPOSURE
AUTO
COLOR TONE
ENHANCEMENT
MANUAL
PAPER SELECT
100%
COPY RATIO
8/ 11 AUTO 1
2
OK
1 . . . 3 . . . 5
TEXT
PRINTED
PHOTO
COPY
OF COPY
EXPOSURE
AUTO
MANUAL
PAPER SELECT
8/ 1 AUTO
TEXT/
PRTD.PHOT
1
2
OUTPUT
2-SIDED
COPY
COLOR TONE
ENHANCEMENT
1 . . . 3 . . . 5
PRTD.
TE
PRI
PH
COP
OF
AUTO
MANUAL
AUTO
SIDED
OPY
UTPUT
ENHANCEMENT
1 . . . 3 . . . 5