Auto – Sharp AR-C160 User Manual
Page 33
2-9
CHAPTER
2
MAKING COPIES
Using the RADF
USING THE RADF
2-sided copies from 2-sided originals
To copy in the 2-sided to 2-sided mode, an optional duplex module (AR-
DU2N) must be installed.
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
Press the
key on the touch panel.
4
Press the “OK” key.
5
Enter the desired number of copies.
●
When making color copies in the duplex mode or making B/W
copies in the duplex mode onto paper 8-1/2" x 14" or larger, only
one copy per original can be made. Even if a multiple number of
copies is set, the number will be changed to 1 when a START key
is pressed.
6
Press the COLOR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform color copying, press the COLOR COPY START
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
To cancel a copy run during duplex copying, press the CLEAR
ALL (
CA
) key.
Copy (2-sided)
Original (2-sided)
OUTPUT
2-SIDED
COPY
AUTO
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
8/ 11
AUTO
1
2
Maximum height
line
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
8/ 11
AUTO
1
2
C
CA
CLEAR
INTERRUPT
CLEAR
ALL
1
2
3
4
5
6
7
8
9
0
P
C
CL
PROGRAM
AUDIT
INTE
CLE
AL