Samsung Digimax 240 - Manual (Page 19)

19
READY
Identification of features
Camera mode definition
You can select the desired working mode by using the mode dial located on the top of the camera. This
digital camera has 4 working modes. These are listed below
MOVIE CLIP mode ( )
This mode is used for movie clips.
The flash is changed to FLASH OFF when this mode is selected.
STILL IMAGE mode ( )
This mode is used for still image shots
Normal : 0.8m ~ infinity
Macro : Wide - 0.1m ~ 0.8m
Tele - 0.4m ~ 0.8m
PLAY mode ( )
In this mode, the stored images on the memory can be viewed on the LCD monitor on the back of
the camera or on an external monitor using a video output terminal.
SETUP mode ( )
In this mode, you can set up basic settings such as BEEP, FORMAT, POWER OFF, RESET,
DATE/TIME, VIDEO OUT, LANGUAGE.
Mode dial
INFORMATION
PC mode
Your computer will recognize the camera as a Removable Disk when connected by the USB
cable. You can transfer images between the computer and the camera. You have to install
the camera driver before connecting the USB cable. The camera working mode will be
changed to PC mode by connecting the USB cable.