Samsung Digimax 240 - Manual (Page 70)

70
Play mode
PROTECT
This is used to protect specific shots from being accidentally erased (LOCK).
It also releases images that have been previously protected (UNLOCK).
Protecting images
1. Turn the camera power on.
2. Press the MODE button to select the PLAY mode( ).
3. Do not turn the LCD monitor off.
4. Select an image that you want to protect by pressing the
LEFT( )/ RIGHT( ) button.
5. Press the MENU button to display the PLAY mode menu on
the LCD monitor.
6. Press the UP( )/ DOWN( ) button and select [PROTECT].
7. Press the RIGHT( ) button and the sub menu will display.
8. Select [ONE IMAGE] or [ALL IMAGES] by pressing the
UP( )/ DOWN( ) button and press the RIGHT( ) button.
- ONE IMAGE : This protects a single image.
- ALL IMAGES : This protects all the images in the
memory.
9. Select [LOCK] or [UNLOCK] by pressing the UP( )/
DOWN( ) button and press the OK button.
- LOCK : Sets up the PROTECT function.
- UNLOCK : Discards the PROTECT function.
If you protect an image, the protect icon( )
will be displayed on the LCD monitor.
Protect indicator
Unprotected image do not
have an indicator.
PLAY 1/2
SLIDE SHOW 3 SEC
PROTECT
DELETE ALL
LCD BRIGHTNESS 0
EXIT:MENU CHANGE:
PLAY 1/2
PROTECT
ONE IMAGE
ALL IMAGES
BACK CHANGE: