Samsung Digimax 240 - Manual (Page 92)

92
Before contacting a service center
Please check the following
Symptom
The camera
doesn t switch on
The camera power is
down whilst in use
Batteries drain
quickly
There is low battery capacity
An AC Power Adapter is not connected
Insert fresh batteries
Connect an AC Power Adapter
The batteries are exhausted
The Camera is turned off automatically due
to the Auto power off function
The Adapter plug is not connected
securely
Insert fresh batteries
Slide the power switch to reactivate
camera
Remove and re-insert the plug
The Camera is being used in low
temperatures
Mixing old and new batteries or battery
types
Keep the camera in warm conditions
(i.e. inside a coat or jacket) and only
remove it in order to take images
Insert fresh batteries
(all of which should be of the same type)
Camera does not
take images when
pressing the Shutter
button
The memory is full
The CARD has not been formatted.
The memory is exhausted
The camera power is off
The batteries are exhausted
The camera working mode is positioned
incorrectly
After turning the camera off, insert a new
memory card or delete a stored image.
Format the memory
Insert a new memory card
Turn the camera power on
Insert fresh batteries
Change the camera working mode to the
RECORDING mode.
Causes Remedy
The images are
unclear
The focus mode is not correct Keep the focus range.
The flash does not
fire
FLASH OFF mode has been selected Disengage the FLASH OFF mode
Incorrect date and
time is displayed
The date and time have been set incorrectly. Reset the date and time correctly. (p.82)