Samsung Digimax 240 - Manual (Page 52)

52
Recording mode
EV COMPENSATION
This camera automatically adjusts the exposure according to the ambient lighting conditions.
However, you can select the exposure value by using the [EXPOSURE] sub menu.
In the STILL IMAGE mode, you can select the exposure value.
If you increase the exposure value, the image will be brighter.
If you decrease the exposure value, the image will be darker.
Selecting the exposure value
1. Turn the camera power on.
2. Select the STILL IMAGE mode by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button in the STILL IMAGE mode to display
the menu on the LCD monitor.
5. Press the UP( )/ DOWN( ) button and select
[EXPOSURE].
6. Press the RIGHT( ) button and the sub menu will display.
7. Press the UP( )/ DOWN( ) button and select the desired
[EXPOSURE] sub menu.
8. Press the OK button to confirm the setting.
The default is [0.0EV].
9. Press the MENU button to cancel the menu display.
STILL IMAGE mode
STILL IMAGE mode
STILL IMAGE 1/2
IMAGE SIZE
QUALITY
EXPOSURE 0.0
WHITE BALANCE AUTO
EXIT:MENU CHANGE:
STILL IMAGE 1/2
EXPOSURE
0.0
BACK: SET:OK