Samsung Digimax 240 - Manual (Page 46)

46
Recording mode
SELF-TIMER( )/ RIGHT( ) button
When the menu is displayed on the LCD monitor, pressing the
RIGHT( ) button makes the menu cursor move to sub menu.
When the menu is not displayed on the LCD monitor, the
RIGHT( ) button operates as the SELF-TIMER button( )
in RECORDING(STILL IMAGE/ MOVIE) mode.
This function is used when the photographer would also like to
be in the picture.
Selecting the self-timer
The self-timer activates only in RECORDING (STILL IMAGE/ MOVIE CLIP) mode.
Use a tripod or place the camera on a stable surface.
1. Do not turn the LCD monitor off.
2. Select RECORDING (STILL IMAGE/ MOVIE CLIP) mode by rotating the mode dial.
3. If the self-timer indicator is displayed on the LCD monitor by pressing the SELF-TIMER button( ),
the setting is completed. Press the self-timer button again, and the self-timer is canceled.
4. Pressing the shutter button will allow an interval of ten seconds before the image is taken. After that,
the self-timer is cancelled.
In MOVIE CLIP mode, the movie clip can be recorded as long as the memory allows. To stop the
recording, press the shutter button.
INFORMATION
The default is OFF.
The self-timer LED lamp(red) will blink for 10 seconds after the SELF-TIMER button has
been pressed.
- For the first seven seconds, the LED blinks slowly.
- For the final three seconds, the LED blinks quickly.
If you want to cancel the self-timer operation, press the self-timer button again.