Samsung Digimax 240 - Manual (Page 36)

36
Recording mode
Steps 1 - 4 are the same as those for recording a still image.
5. Select the STILL IMAGE( ) mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image
by using either the viewfinder or LCD monitor.
7. Press the shutter button to capture an image.
Recording a still image
NOTICE
The available recording time depends on the memory capacity.
The flash is changed to FLASH OFF when this mode is selected.
The zoom function can't be activated in the movie clip mode.
7. Point the camera towards the subject and compose the shot by using the viewfinder or LCD monitor.
Press the shutter button and movie clips are recorded for as long as the available recording time.
Movie clips will still be recorded if the shutter button is released. The movie clip icon will blink during the
recording process.
If you wish to stop recording, press the shutter button again.
Image size and type are listed below.
- Image size : QVGA (320 x 240)
- File type : *.AVI