Samsung Digimax 240 - Manual (Page 53)

53
ADV
ANCED
Recording mode
NOTICE
Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps)
This change to the exposure will remain until the camera is switched off. When the camera is
turned on again, the exposure compensation setting returns to 0.0EV (discarding the
exposure compensation).
When you have selected a change in exposure value, the value is displayed on the LCD.
Decreasing or increasing the exposure value may lead to images being under or over
exposed (too dark or too bright). Review your images using the LCD monitor to check that
they have been successful.
WHITE BALANCE
Different lighting conditions may cause a color cast on your images.
The white balance control allows you to adjust the colors to appear more natural looking.
The changed white balance value is maintained until the camera power is off.
There are 6 white balance menus : AUTO/ DAYLIGHT/ CLOUDY/ SUNSET / TUNGSTEN/
FLUORESCENT
Selecting the white balance
1. Turn the camera power on.
2. Select the RECORDING(STILL IMAGE/ MOVIE CLIP) mode
by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button in the STILL IMAGE mode to display
menu on the LCD monitor.
STILL IMAGE mode
STILL IMAGE 1/2
IMAGE SIZE
QUALITY
EXPOSURE 0.0
WHITE BALANCE AUTO
EXIT:MENU CHANGE: