Samsung Digimax 240 - Manual (Page 50)

50
Recording mode
Selecting the image quality
1. Turn the camera power on.
2. Select the STILL IMAGE mode by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the menu on the LCD
monitor.
5. Press the UP( )/ DOWN( ) button and select [QUALITY].
6. Press the RIGHT( ) button and the sub menu will display.
7. Press the UP( )/ DOWN( ) button and select [SUPER FINE],
[FINE] or [NORMAL].
8. Press the OK button to confirm the setting.
The default is [FINE].
9. Press the MENU button to cancel the menu display.
SUPER FINE FINE NORMAL
IMAGE QUALITY
In the STILL IMAGE mode, you can select the image quality. (Data compression rate)
The higher the QUALITY setting, the better the final image will be. However, the high quality setting
will require more memory and therefore reduce the number of images you can store on the memory.
SUPER FINE is the highest quality and NORMAL is the lowest setting. Choose the setting
appropriate for your needs. The image qualities are listed below.
STILL IMAGE mode
STILL IMAGE 1/2
IMAGE SIZE
QUALITY
EXPOSURE 0.0
WHITE BALANCE AUTO
EXIT:MENU CHANGE:
STILL IMAGE mode
STILL IMAGE 1/2
QUALITY
SUPER FINE
FINE
NORMAL
BACK: SET:OK