Samsung Digimax 240 - Manual (Page 80)

80
Setup mode
DATE IMPRINT
There is an option to include DATE/TIME on still images.
Selecting the date imprint function
1. Turn the camera power on.
2. Select the SETUP mode( ) by rotating the mode dial.
3. [SETUP 1/3] menu will display.
4. Select [SETUP 2/3] menu by pressing the RIGHT( ) button.
5. Press the UP( )/ DOWN( ) button and select [DATE
IMPRINT].
6. Press the RIGHT( ) button and the sub menu will display.
7. Select [ON] or [OFF] by pressing the UP( )/ DOWN( )
button. Press the OK button to confirm the setting.
8. The default is [ON].
INFORMATION
This function is not available in the movie clip mode.
Date will be imprinted as DATE TYPE setting.
The DATE IMPRINT function is unaffected by the camera being switched on and off.
Imprinted date can be set in [DATE SETUP].
Even though the [DATE IMPRINT] menu is set to [OFF] , the date will be displayed on the
LCD monitor in the RECORDING(STILL IMAGE, MOVIE CLIP) mode.
SETUP 2/3
DATE IMPRINT ON
DATE TYPE Y/M/D
DATE SETUP
VIDEO OUT NTSC
CHANGE:
SETUP 2/3
DATE IMPRINT
OFF
ON
BACK: SET:OK