Samsung Digimax 240 - Manual (Page 60)

60
Play mode
INFORMATION
If the memory card is inserted in the camera, all the camera functions are applied only to the
CARD.
If the CARD is not inserted in the camera, all the camera functions are applied only to the
internal memory.
The last image stored on the internal memory will be displayed on the LCD monitor.
If the SD memory card is inserted, the last image stored on the SD memory card will be
displayed.
The LCD monitor will remain in operation until the camera is switched off in PLAY mode.
The menu will not display on the LCD monitor under the following circumstances:
- When another button is being pressed.
- While image data is being processed.
(While the green LED next to the viewfinder is blinking)
- When there is no battery capacity.
- When the flash is charged
NOTICE
If there are no images stored on the internal memory or the memory card, a [NO IMAGE !]
message will be displayed on the LCD monitor.