Samsung Digimax 240 - Manual (Page 49)

49
ADV
ANCED
Recording mode
IMAGE SIZE
In the STILL IMAGE mode, you can select the image size.
A large image uses more memory, so increasing image size will reduce the total number of shots you
can store on a memory.
The image sizes are listed below.
Selecting the image size
1. Turn the camera power on.
2. Select the STILL IMAGE mode by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the menu on the LCD
monitor.
5. Press the UP( )/ DOWN( ) button and select [IMAGE SIZE].
6. Press the RIGHT( ) button and the sub menu will display.
7. Press the UP( )/ DOWN( ) button and select [L] or [S].
8. Press the OK button to confirm the setting.
The default is [1600x1200 [L] ].
9. Press the MENU button to cancel the menu display.
1600X1200 800X600
STILL IMAGE mode
STILL IMAGE 1/2
IMAGE SIZE
QUALITY
EXPOSURE 0.0
WHITE BALANCE AUTO
EXIT:MENU CHANGE:
STILL IMAGE mode
STILL IMAGE 1/2
IMAGE SIZE
1600X1200
800X600
BACK: SET:OK