Samsung Digimax 240 - Manual (Page 78)

78
Setup mode
POWER OFF
This function switches the camera off after a set amount of time in order to prevent unnecessary
battery drainage.
You can set the power to switch off at any specified time( 3, 5, 10, 30MIN) from the last operation.
If you select [CANCEL], the power off function will not operate.
Note that the automatic power off does not operate if the camera is in slide show or PC mode.
Selecting the power off function
1. Turn the camera power on.
2. Select the SETUP mode( ) by rotating the mode dial.
3. [SETUP 1/3] menu will display.
4. Press the UP( )/ DOWN( ) button and select [POWER
OFF].
5. Press the RIGHT( ) button and the sub menu will display.
6. Select desired sub menu by pressing the UP( )/ DOWN( )
button. The default is [3 MIN].
7. Press the OK button to confirm the setting.
Time for power off
Power status Period of time (Battery) Period of time (AC adapter)
Idle mode(LCD monitor off) About 60 sec About 60 sec
Power off User setting 30 MIN
INFORMATION
Even if the batteries or AC adapter are removed and inserted again, the power off setting will
be preserved.
SETUP 1/3
BEEP ON
FORMAT
POWER OFF 3 MIN
RESET
CHANGE:
SETUP 1/3
POWER OFF
3 MIN
BACK: SET:OK