Siemens 4110 - Manual (Page 16)

15
Putting the telephone into operation
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Inbetriebnahme.fm 4.9.02
Step
by
step
Attaching the belt clip
Press the belt clip against the rear of the handset until the side “lugs” latch into
the cut-away sections.
Activating/deactivating the handset
C
: To activate/deactivate the handset, long-press the “replace handset”
key – you will hear a confirmation tone
*
.
The handset will switch on automatically when the batteries have been insert-
ed after it has been placed in the base.
Activating/deactivating the key lock
You can “lock” the handset’s keypad, for example when carrying the handset
around with you. Accidental key actuations will then have no effect.
The keypad lock will be deactivated automatically if a call arrives and reactivat-
ed on completion of the call.
To answer a call: press the “lift handset” key

.
}
: To activate/deactivate the keypad lock, long-press the “replace handset”
key – you will hear a confirmation tone.
* Confirmation tone = sequence of ascending tones,
Error tone= sequence of descending tones.
Info