Appointments, Switch off the alarm, Time functions – Siemens 4110 User Manual
Page 23
22
Time functions
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619
Zeitfunktionen.fm
4.9.02
Step
by
step
Switch off the alarm
An alarm is signalled like an incoming call. The handset rings and the status
LED flashes (for about 30 sec.).
You switch the alarm off by pressing any key.
Appointments
Your handset can remind you of one appointment. The required time has to be
stored for this. You can only set one appointment at a time.
If you have set an appointment, this will be displayed by the symbol
1
.
Setting an appointment
Press
* for selection menus.
Select using [
] and [OK ]:
Calendar/Clock
→
Set Appoints.
.
Activate the appointment function
Select using
) *:
On
if the current setting is
Off
.
Use
' to skip one line down.
Enter the date, let’s say 2005 day/month. So for this example: 20.05.
Use
' to skip one line down.
Enter the time
Enter, for instance, 0905 hours/minutes. So for this example: 9.05 hrs.
Use
' to skip one line down.
Select the ringer melody for the appointment function
Select using
) *: ringer melody.
Select using:
Save
.
An appointment will only be sounded if the handset is in the idle condition. An
appointment melody will not be played if the room monitor function has been
activated or during automatic redial or while an internal or external call is in
progress.
Switching off appointment signalling
An appointment reminder is signalled like an incoming call. The handset rings
and the status LED flashes (for about 30 sec.)
You switch appointment signalling off by pressing any key.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Info