Siemens 4110 - Manual (Page 83)

82
Operation using a telephone system
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Wahloptionen.fm 4.9.02
Step
by
Step
Step 3: External enquiry call
During an external call you want to call another “external” party; see “Setting
external/internal enquiry call” on page 32 for setting details:
Press * for selection menus.
Select using [  ] and [OK ]: Enquiry call .
Enter the call number for the second party.
End external enquiry call
You are conducting an enquiry call and wish to terminate it:
Press * for menu.
Select using [  ] and [OK ]: End .
Dialling options
With the KEYPAD function, you can control certain service elements by enter-
ing sequences of characters and numbers.
The KEYPAD function should be set when connecting your Gigaset 4110isdn to
an ISDN telephone system or a switching centre (e.g. Centrex) which is con-
trolled by the KEYPAD protocol. In this case, the numbers/characters
0 - 9 , * , #
are sent as keypad information elements. For the information and codes you
can send, please contact your service provider.
If your Gigaset 4110isdn is linked to a Centrex system, you can use the follow-
ing features.
1.
2.
3.
1.
2.
Calling Name
Identification
(CNI) In the case of incoming calls from other CENTREX sub-
scribers, the number and name of the caller is shown on
the display.
Message Wait-
ing Indication
(MWI) On comfort handsets, the display key - is offered if there
are new callers in the caller list.
Calling up the caller list results in deletion of the display key
- .
CENTREX call The CENTREX call is signalled acoustically as an internal
call.