Siemens 4110 - Manual (Page 58)

57
Convenient telephoning
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Komfortabel.fm 4.9.02
Step
by
step
Call waiting - CW
Call waiting - activating/deactivating CW see page 31
Accepting/rejecting external call waiting
You hear the call waiting tone during your call (internal or external).
Confirm [ACCEPT]. You accept the waiting call and the first call is put on hold.
Both parties are shown on the display, the current party is highlighted.
or Confirm [REJECT]. Reject the waiting call.
Ending an active call
Press * for the menu.
Confirm with [OK ]: End .
Forwarding waiting calls internally
You can forward waiting calls internally without taking the call.
Press * for the menu.
Select using [ Z ], Forward and [OK ]: (internal subscriber).
Continue the active call.
Calls can only be forwarded to internal subscribers who have not been called
already.
Holding calls (Call Hold)
Putting external subscribers on hold
You are engaged in an external call.
Press [INT]: The external subscriber is put on hold.
The waiting external subscriber hears music-on-hold. You can conduct an
internal enquiry call.
As soon as the internal subscriber ends the enquiry call, [BACK] appears on the
display for 10 seconds. Pressing [BACK] reconnects you to the external caller.
If this option is not used, the ring tone sounds again after 10 seconds.
or To end the internal call, press * for the menu and select [End] followed by
[OK ]. You are then returned to the external call and the internal subscriber
hears the busy tone.
Putting internal subscribers on hold
You are conducting an internal call.
Press [CONSULT]: The internal subscriber is put on hold.
You can set up an external enquiry call.
To end the external call, press * for the menu and select [End] followed by
[OK ]. You are then returned to the internal call and the external connection is
closed.
or Three-way calling: press [CONF.]. This establishes the conference circuit.
1.
1.
1.
2.
1.
2.
Info
1.
2.
2.
1.
2.
2.