Siemens 4110 - Manual (Page 84)

83
Operation using a telephone system
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Wahloptionen.fm 4.9.02
Step
by
step
Setting options
You have the option of switching between Standard dial (factory default) Auto
keypad and Dial * and # settings.
Standard dial
Having switched on, Standard dial * and # are not transmitted when dialling and
when * and # are entered, the unit does not switch to keypad.
Auto keypad
When * or # are input, this setting automatically switches signalling to keypad
when dialling. This automatic switching is required for commands to the
switching centre or telephone system.
Dial * and #
When
Dial * and # are activated, the characters * and # are sent as commands
to the switching centre or telephone system when dialling.
Regardless of the above setting options, the system is automatically switched
to tone dialling (DTMF) when dialling is complete, e.g. for telecontrol of an an-
swering machine.
Activating standard dialling (ISDN)
* is pressed for menus.
Press [
Z ] and [OK ] to select: Base Settings → Settings → System settings →
Spec. function → Dial properties → Standard dial (
'
before menu item = ON /
none = OFF).
Activating automatic keypad switching
* is pressed for menus.
Press [
Z ] and [OK ] to select: Base Settings → Settings → System settings →
Spec. function → Dial properties → Auto keypad (
'
before menu item = ON /
none = OFF).
Activating * and # dialling
* is pressed for menus.
Press [
Z ] and [OK ] to select: Base Settings → Settings → System settings →
Spec. function → Dial properties → Dial * and # (
'
before menu item = ON /
none = OFF).
Activating/De-activating the keypad during a call
In addition to the long-term settings described above, you also have the option
of switching temporarily to keypad.
The setting only applies to an ongoing external call and is automatically de-ac-
tivated when the call is finished.
Requirement: You are currently making a call.
* is pressed for menus.
Press [
Z ] and [OK ] to select: Keypad on? .
Enter keypad character sequence (code).
or Press [ Z ] and [OK ] to select: Keypad off? .
1.
2.
1.
2.
1.
2.
1.
2.
3.
2.