Siemens 4110 - Manual (Page 51)

50
Convenient telephoning
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Komfortabel.fm 4.9.02
Step
by
step
Toggle
By toggling, you switch from the active (1st call) to the inactive (2nd call)
connection. The first call remains connected.
To switch between called parties, select ( and ' or [  ] and [  ].
Ending an enquiry call/toggle
Press * for the menu.
Select using [  ] and [OK ]: End .
You are reconnected with the subscriber on hold.
Conference circuit
A conference circuit enables you to talk to two parties at the same time. These
can either comprise two external subscribers, or one external and one internal
subscriber.
Setting up three-way calling
You are conducting an enquiry call. The first subscriber is put on hold.
Press [CONF.]: This establishes the conference circuit.
Ending three-way calling
You are conducting three-way calling.
Press [INDIV.]: The conference call is terminated. The connection which was
active immediately before three-way calling was set up is re-established as the
active connection. The other subscriber is put on hold once more.
Setting up an external enquiry call
You would like to call an internal subscriber during an external call; To set, see:
Press * for the menu.
Select using [  ] and [OK ]: Enquiry call .
Enter the call number for the second subscriber.
Ending an external enquiry call
You are conducting an enquiry call which you would like to end:
Press * for the menu.
Select using [  ] and [OK ]: End .
Transferring calls on/before answer – ECT (Explicit Call Transfer)
ECT is currently only supported behind PABXs. To activate/deactivate call
transfer, see page 83.
You are conducting an external call which you would like to transfer to another
external subscriber.
Press * for the menu.
Select using [  ] and [OK ]: Enquiry call .
Enter the call number to which the call is to be transferred.
Replace the handset: press
+
.
or Conduct the enquiry call.
Replace the handset: press
+
.
1.
1.
2.
1.
1.
1.
2.
3.
1.
2.
1.
2.
3.
4.
4.
5.