Siemens 4110 - Manual (Page 18)

17
Registering and de-registering handsets
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Inbetriebnahme.fm 4.9.02
Step
by
step
Registering and de-registering
handsets
To be able to phone using your handset, you have to “introduce” it to the base
(register it). Registration is a very straightforward procedure that takes place au-
tomatically.
In contrast to this, other manufacturers’ handsets have to be registered manu-
ally (see page 18).
Automatic registration
of Gigaset 4000 handsets on a Gigaset 4110isdn base
Automatic registration (“introduction”) is only possible with the handset sup-
plied and each additionally purchased handset. Before switching your handset
on, place it in the base with the display facing upward.
After about a minute you will receive the advisory “Time not activated”.
To make the setting, please proceed as described on page 26.
The handset’s internal number will then be displayed (“Internal 11” for exam-
ple).
Your handset has now been registered and is ready for operation.
The handset will automatically be assigned the next free internal number
(12-18). In the event of full occupancy, please de-register a registered
handset first.
It is possible to assign a handset another internal name later (page 31).
'
G