Siemens 4110 - Manual (Page 80)

79
Security settings
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Sicherheit.fm 4.9.02
Step
by
step
Security settings
Change system PIN
With the system PIN (Personal Identification Number) you can make the follow-
ing settings in the base station to protect your equipment from unauthorised
access:
* →
Costs
* → Base Settings → Ext. call forw.
* → Base Settings → Int. call forw.
* → Base Settings → Night service
* → Base Settings → Settings
* → Base Settings → Installation
The system PIN is only effective if it is ≠ 0.
Your Gigaset 4110 /4115 isdn comes supplied with the PIN number 0000.
Press * for selection menus.
Select using [  ] and [OK ]: Base Settings → Settings → Security .
Select using [  ] and [OK ]: Change PIN .
Enter the new system PIN (max. 8 digits) and confirm with [OK ].
Re-enter the new system PIN and confirm with [OK ].
Specifying the class-of-service
You can set different classes-of-service for all registered devices:
1. Unrestricted
(factory setting)
All devices can accept incoming calls and be used to make external/internal
calls.
2. Incoming only
The devices can only accept incoming calls. External calling is not possible.
It is possible to make internal calls. Emergency numbers can be dialled.
3. Internal only
The devices can only accept and be used to make internal calls.
Emergency numbers can be dialled.
Press * for selection menus.
Select using [  ] and [OK ]: Base Settings → Settings → Security .
Select using [  ] and [OK ]: Authorisation → (required internal user) → [ ) ] →
(required class-of-service,
'
in front of the menu item = ON / without = OFF ).
1.
2.
3.
4.
5.
It is important that you remember your new system PIN. If you forget
it, the device will have to be opened up. In this case contact the
Siemens hotline.
1.
2.
3.