Siemens 4110 - Manual (Page 50)

49
Convenient telephoning
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Komfortabel.fm 4.9.02
Step
by
step
Ring delay
Using the ring delay feature you can configure a handset for each individual
incoming MSN to delay response to the call signal. However, during this ring
delay time the handset can accept the call using the
Accept? function without
a call signal queuing.
Setting ring delay
Press * for selection menus.
Select using [ Z ] and [OK ]: Base Settings → Settings → Setup user
→ Setup device .
Select using [ Z ] and [ | ]: (required internal subscriber).
Select using [ Z ] and [OK ]: Ring delay .
Select using [ Z ] and [OK ]: (required MSN).
Set No. of rings using
@
-

,
«
= off.
Picking up calls during ring delay
A call is coming through to the assigned MSN.
Press the
E
key, the following appears in the display: Accept?
Press [YES] . You can then answer the call.
or Press [NO] . You can set up your own external or internal call.
Conducting calls with more than one subscriber
Internal enquiry call
You would like to call an internal subscriber during an external call.
Press ) and enter the call number for the second subscriber.
A connection is established with the internal subscriber.
or ) → [LIST].
Select using [
Z ] and [OK ]: (required internal subscriber).
A connection is established with the internal subscriber.
If the internal subscriber dialled is busy:
Press [BACK]: You are reconnected with the external caller.
The internal subscriber answers the call:
or Toggling: you can switch between call parties with [ Ž ] and [  ].
or Three-way calling: press [CONF.]. This establishes the conference circuit.
1.
2.
3.
4.
5.
6.
1.
2.
3.
3.
1.
1.
2.
3.
3.
3.