Other sms features, Sms on pbxs, Errors while an sms message is being transmitted – Siemens 4110 User Manual
Page 79: Options when reading a stored sms message, Short messages (sms)
78
Short messages (SMS)
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619
sms.fm
4.9.02
Step
by
step
Options when reading a stored SMS message
You can use the following functions via the menu when reading a stored SMS
message.
Press
* for selection menus.
Select using [OK]:
Text Message
Select using [
] and [OK]:
Outbox
3
(e.g. 3 entries)
Select using [
] and [
)
]:
(required SMS).
Select using [
] and [OK]:
Read textmessage
Use [
)
] to open the menu.
Write a new text as a reply
Select using [OK]:
Write Message
. You can write a new SMS message then
send it (see page 71).
Send a stored SMS message
or
Select using [
] and [OK]:
Use Text.
You can change or add to the stored SMS
message then send it (see page 71).
Other SMS features
Find out what SMS features your carrier offers and what call numbers and
codes you have to use.
Your provider can give you details of the current offering for SMS services.
SMS on PBXs
If your Gigaset 4110isdn is connected to an ISDN PBX, please refer to your
PBX’s operating instructions for information about SMS functionality
(see “Entering, changing or deleting call numbers of SMS centres” on
page 70).
Errors while an SMS message is being transmitted
An interruption in transmission results in charges.
The following error codes may be displayed when this occurs:
E0: messages cannot be sent if the transmission of your call number has not
been enabled.
FD: Sending and receiving SMS messages will not be possible if the number
of the SMS centre is missing or if it has been incorrectly stored. The SMS
centre’s incorrect number will also appear in your missed calls list; please
delete the number there. Check whether the SMS centre’s number has
been stored correctly (see page 70).
SMS messages with special contents such as images or sound are not sup-
ported on your Gigaset 4110isdn.
1.
2.
3.
4.
5.
6.
7.
7.
Error code
Description
E0
Permanent call number suppression activated (CLIR).
FE
Error while message was being transmitted
FD
Error while connection was being set up to the Service centre
C3
Incorrect call number
Info