Siemens 4110 - Manual (Page 87)

86
Operation with Gigaset repeater
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Geraete.fm 4.9.02
Step
by
step
Operation with Gigaset repeater
You can use the Gigaset repeater to increase the range of your handsets. Your
Gigaset 4110isdn is prepared for use of a Gigaset repeater (accessory).
Activate/deactivate repeater capability
Use this function to activate or deactivate repeater capability.
Press * for selection menus.
Select using [  ] and [OK ]: Base Settings → Settings → System settings →
Spec. function → Repeater .
Set with [OK ] (
'
in front of the menu item = ON / without = OFF)
Press the [NEXT] key to accept, the handset will briefly stop operating.
Registering a repeater
The Gigaset repeater is switched off (unplugged from mains).
Press the registration key on the base station.
Make sure there are no other base stations near the Gigaset repeater in the
registration state when doing this.
Connect the Gigaset repeater to the mains.
An LED on the Gigaset repeater will flash continuously. This diode will soon be
permanently lit, indicating completion of the registration process and the ready-
to-operate condition.
More detailed information can be found in the Gigaset repeater’s operating in-
structions.
1.
2.
3.
4.
1.
2.
Info
3.
4.