SRS Labs Projector 8953H - Manual (Page 110)

110
5.4 Slide Show Mode
Fig. 5.4 Slide Show Mode
The following operations can be accessible while the Slide show is displayed.
* These operations are not accessible while the projector OSD menu is displayed.
• It is impossible to change the input port by the INPUT button if the
THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.
• Display the projector OSD menu before changing the input port .
• Images can be displayed when it is recorded in the playlist.
• Image can not be displayed in the thumbnail if it is not recorded in the playlist. (116)
• When the SLIDE SHOW mode is set to ONE TIME, the last slide of the
presentation will be held on screen till the ENTER button on the remote control
or Web Remote Control, or INPUT button on the projector is pushed.
NOTE
You can play the Slide show with the projector menu.
Select the SLIDE SHOW on PC-LESS PRESENTATION
menu and press the ENTER / ► button on the remote
control or ► button on Keypad. Then Slide show will start.
You can also play the Slide show by clicking [SLIDE
SHOW] button in the Web Remote Control.
5. PC-LESS Presentation
Button operation
Functions
The remote
control
The keypad
on the
projector
Web Remote
in web browser
software.
ENTER INPUT ENTER Displays thumbnail.
MENU - MENU
Displays PC-LESS PRESENTATION
menu.
The Slide Show Mode (Fig. 5.4) displays a full screen image and switches the images
at intervals set in the Display time. The Display time can be set by the Playlist (116)
and menu. (111)