SRS Labs Projector 8953H - Manual (Page 60)

60
3.8 Profile data
The network setting to connect the projector and PC can be stored as a profile
data. Once the data is stored, all you need to do is to select the data to connect to
the network. It is recommended when the same network connection is often used.
3.8.1 Outline of Profile data
The profile data is made on the Manual
Configuration screen. (41)
Up to 10 profile data can be stored for each
network adapter.
1) Select [Profile] and click [New].
2) The “Create new profile” will come up.
If you have already made 10 profile data,
you cannot make a new one, until you delete
a stored data.
Input all information required for your
network connection.
If you want to clear the information you input,
click [Clear].
3.8.2 Making Profile data
3) Click [OK], after all information is set.
If you don’t want to store it, click [Cancel].
4) The new profile data is shown in the profile list, if you click [OK].
• When you make a new profile data, it is strongly recommended to
check that the new dada can work properly by selecting the data at the Profile
connection. (41)
• If you change a wireless network adapter on the projector or PC, make a new
profile data for the adapter.
NOTE
3. Using the Live Mode