SRS Labs Projector 8953H - Manual (Page 61)

61
3. Using the Live Mode
If necessary, the profile data can be edited on
the Manual Configuration screen. (41)
1) Select [Profile], and select one of the data
listed in the window.
2) Click [Edit].
3) The “Edit profile” screen will come up.
4) Edit the information required to be revised.
If you want to clear all information in the
window, click [Clear].
5) Click [OK], after the editing is completed.
If you don’t want to store it, click [Cancel].
3.8.3 Editing Profile data
6) The edited profile data is stored and shown in the profile list with the new date
created information, if you click [OK].
• When you edit a profile data, it is strongly recommended to check
that the edited data can work properly by selecting the data at the Profile
connection. (41)
NOTE
3.8 Profile data (continued)