SRS Labs Projector 8953H - Manual (Page 81)

81
4. Management with Web browser software
4.1 Configuring and controlling the projector via a web browser (Continued)
4.1.10 Projector Control
Controls the projector.
Item Description
Main
Power Turns the power on/off.
Input Source Selects the input source.
Picture Mode Selects the picture mode setting.
Blank On/Off Turns Blank on/off.
Mute Turns Mute on/off.
Freeze Turns Freeze on/off.
Magnify
Controls the magnify setting.
In some input signal sources, it might stop “Magnify” even
though it does not reach to maximum setting value.
Picture
Brightness Adjusts the brightness setting.
Contrast Adjusts the contrast setting.
Gamma Selects the gamma setting.
Color Temp Selects the color temperature setting.
Color Adjusts the color setting.
Tint Adjusts the tint setting.
Sharpness Adjusts the sharpness setting.
Active Iris Selects the active iris setting.
MyMemory Save Saves the MyMemory data.
MyMemory Recall Recalls the MyMemory data.
The items shown in the table below can be
performed using the Projector Control menu.
Select an item using the up and down arrow keys
on the PC.
Most of the items have a submenu. Refer to the
table below for details.
• The setting value may not match with the actual value if the user
changes the value manually. In that case, please refresh the page by clicking
[Refresh] button.
NOTE